Alarm→Other settings explained 

0-776-80, 0-776-81, 0-776-84


Get to the menu
  1. Press the menu button on the remote and enter the password (default is 6666)

  2. Choose the menu options: AlarmOther




Setting

Options

Explanation

Alarm out time

5s
10s
.
.
900s
This is the amount of time the alarm output stays active after the trigger has gone.
Low speed

000
001
.
.
255
If the speed drops below this value, the alarm out will activate. This will be in either MPH or KM/H depending on the Speed unit set here
Low voltage

00.0V
00.1V
.
.
25.5V
If the voltage supplied to the unit drops below this value, the alarm out will activate.
High speed

000
001
.
.
255
If the speed goes above this value, the alarm out will activate. This will be in either MPH or KM/H depending on the Speed unit set here
TO driving
00000s
00001s
.
.
65535s
If the vehicle has been driving for more than the set time, the alarm out will activate.
TO stop
00000s
00001s
.
.
65535s
If the vehicle has been stopped for more than the set time, the alarm out will activate.
Speed


Enable or disable the alarm output for both Low speed and High speed
MD


Enable or disable the alarm output for motion detection, set up here
TO driving

Enable or disable the alarm output for the TO driving time, set above.
G-sensor


Enable or disable the alarm output for the G-sensor, set up here
HDD Fail


Enable or disable the alarm output when the storage device fails / is not inserted / is full up. This is either the SD cards on the 0-776-80, or the HDD in the 0-776-81 and 0-776-84.
TO stop

Enable or disable the alarm output for the TO stop time, set above.
Video lost


Enable or disable the alarm output when a video input (camera) gets disconnected.
Power


Enable or disable the alarm output for when the voltage drops below the Low voltage value
Creation date: 05/02/2018 17:41      Updated: 11/02/2022 10:48
Files   
DataImage86.jpeg
419 KB
DataImage45.png
3 MB