Data Collection

This guide will go over the layout for the settings pages of the DX and DL range of DVRs

Accessing the Menu - Using a remote

- Press the SETUP button on the remote and enter the password (default is eagle)

Accessing the Menu - Using Touchscreen monitor

- Tap the screen to bring up the options along the bottom of the screen, then tap the Login icon in the bottom right corner (see image below)

Setup

Data Collection

GENERAL
➢ General Sensor

Sensor number: The total alarm input numbers of MDVR.
Sensor name: IO sensor name, it can s et manually. The sensor name of alarm setting interface will
update synchronously after setting.
OSD name: The information embedded to video image.
Copy: Copy the configuration and use it for other sensors.

➢ General Serial port:

RS23 1 and RS232 2 wit h the following features: three axis sensor, expansion, 485 bus and GPS
data
RS485 1 and RS485 2, with the following features: PTZ, control panel, 485 bus and GPS data.
Baud Rate : 2400 115200, 9 classes optional.

➢ General speed

Unit: KM/H and MPH selectable.
Source: GPS, pulse or both optional.

Calibration mode: No need to calibrate if setup as satellite mode.

SNAP SETTING
➢ Snap Setting ---->Time snap

Start time: Start to snap.

End time: Stop snapping.

Setup: Delete and set.
Time snap: Enable to snap at the setting time.
Add: To add snap period, and it supports 8 pieces at most.

➢ Snap Setting ----> Trigger snap

Trigger snap: It snap s when alarm is trigger.

ECO DRIVING (It is still in development.)

Creation date: 30/03/2022 10:10 Updated: 30/03/2022 10:17

Files		Sort by Name Sort by Date
	DataImage1.png 70 KB
	DataImage4.png 67 KB
	DataImage69.png 75 KB
	DataImage23.png 28 KB
	DataImage55.png 65 KB
	DataImage11.png 70 KB
	DataImage79.png 66 KB
	DataImage15.png 73 KB
	DataImage89.png 69 KB