This guide will go over the layout for the settings pages of the DX and DL range of DVRs

Accessing the Menu - Using a remote

  -  Press the SETUP button on the remote and enter the password (default is eagle)

Accessing the Menu - Using Touchscreen monitor

  -  Tap the screen to bring up the options along the bottom of the screen, then tap the Login icon in the bottom right corner (see image below)


Live view ---->Preview
Real time Setting Interface:

Preview audio: Enable the audio when live view the video.
Image setup: Set the live view parameters, including brightness, contrast, etc.
Startup Screen: Set the live view screen, it can be single screen or quad screen or nine screen
Channel: Set the channel when live view

➢ Live view Auto Loop

Screen: Total of 32 screens can be added.
Mode: 1x1, 2x2, 3x3 optional.
Channel: Included channel number.
Duration: Duration for each screen.
Edit: Delete or Edit.
Add screen: Add polling screen
Auto polling: Enable the auto pulling

➢ Live view Live OSD :

It displays the information on screen, such as time, speed, license plate, GPS...
The default is only the time, and the position cannot be set.


➢ Record ---->General

Video type: Default is PAL, NTSC optional
Overwrite: The earliest recording file will be deleted while the HDD or SD card is full to realize loop
Lock duration: Protect the record file to be deleted by fault, default is 7 days.
Pre-recording: Pre record before the alarm happens. Default is 15min, 0 60min optional.

➢ Record Main Stream:

Channel: The total channel numbers of the device, including analog and digital channels.
Channel name: Change the name manually.
Enable: Enable the main stream record function
Resolution: The analogue channel supports D1/HD1/CIF/WD1/WHD1/WCIF while the digital one supports 720P and 1080P.
Frame Rate: Frame Rate of the recording.
Quality: Picture Quality of the recording.
Record mode: Ignition, Time, Event optional. Each channel can be set separately. The sub stream and mirror record are the same
Audio: Enable the audio. Note: Audio cannot be record separately
I frame: Enable to let the frame rate invalid, record file that does not have alarm is I frame only.
Alarm quality: The alarm image is different from the normal recording image.
Encode mode: It supports VBR and CBR modes.

➢ Record Dual stream

Storage: The storage type for sub stream, internal SD and external SD optional.
Record mode: Mirror record, alarm back up record and sub stream.
  •  Mirror record: Channel is selectable. Video resolution and frame rate are the same with main
  • Alarm backup: Channel is selectable. The parameters are the same with main stream
  •  Sub stream: Channel is selectable. Recording parameters are configurable

Sub stream includes channel number, enable or not, audio, resolution, frame rate and image quality.
Sub stream channel: It is selectable according to recording mode.

➢ Record OSD

Embedded key information to video file for easily check when playback.

➢ IPC setup:

Channel: It includes the analog channels and IPC channels. Analog channel will not be shown if it
connects to network camera. IPC is set to Channel 5 when programmed.
Enable: Enable to operate IPC.
IP and port: Display channel details after searching.
Setup: Search and edit IP camera recording parameters
Fast setup: Search all the IP cameras in LAN network, and auto assign IP address to IP camera.
IPC local address: To search network camera of local area network at Intranet. The default one is


Channel: It includes analog channels and IPC channels.
Enable: Enable PTZ.
Operate: It includes serial, N9M and ONVIF. It supports Pelco D and Pelco P PTZ protocols with serial mode.
Address: It is valid with serial mode.
Test: It is to test PTZ is available or not. Click it to pop up PTZ control panel.

Creation date: 30/03/2022 09:38      Updated: 31/03/2022 11:15
91 KB
87 KB
12 KB
81 KB
28 KB
82 KB
87 KB
89 KB
86 KB
84 KB
76 KB
87 KB
85 KB