Can I copy a configuration to multiple devices?

Yes, you can.

Once you have set up the first device, plug in the USB stick you want to use.  The USB light on the front panel of the device will come on after a short while to tell you the USB stick is ready.

IMPORTANT the device will need to be the same firmware Versions to copy and load the config files correctly.

From the device menu select Setup:

Go to the Maintenance tab and the Config section.

Press Export.

!CAUTION! This will imediately export the current configuration overwriting any configuration currently on the USB stick, there is no confirmation or undo.

A message to say that the export was successful should appear. You can then repeat the process on other devices substituting Export for Import.

The Device Registration information will not be copied, these will need to be entered manually on each device.