Using timer off relays to have a constant switching signal

It is possible to use two of our timer off relays (X seconds and Y seconds) to create an on/off looping signal, like the image below:

The way to wire them up is as follows:

  • If this is being used to switch any kind of load, another normal relay needs to be used on the output as the relays use the same power source for both the switching and the output.
  • Both relays need to be either 12v or 24v
  • The relays must be Timer Off type, other types will not work due to either the wrong functions, or the internal connection between the output and the circuitry.
Creation date: 21/06/2018 09:31      Updated: 17/06/2020 12:33
4 KB
18 KB