System→Other Settings explained
0-776-80, 0-776-81, 0-776-84
Get to the menu
Get to the menu
- Press the menu button on the remote and enter the password (default is 6666)
- Choose the menu options: System→Other
Setting | Options | Explanation |
VGA Output | NO OUTPUT 1024*768 1280*720 1920*1080 | On the back of the DVR there is a VGA port which can be plugged in to a PC monitor. This setting determines the resolution shown on the monitor. |
Alm Phone | OFF ON | This setting is used for different models of the DVRs which we do not supply. |
Phone Num | User input (15 letters) | This setting is used for different models of the DVRs which we do not supply. |
CYCLE CH | ALL CH1 . . CH4/CH8 | For each of these you can turn it ON or OFF. If one or more inputs is set to ON, the screen will cycle through all of the selected Note: you MUST save after changing each one individually |
CYCLE Time | 3s 6s 9s 12s 15s | If two or more channels are switched on in the CYCLE CH option above, then this will mean that every CYCLE Time seconds, the visible channel will change to the next one. |
Bind Mouse | VGA CVBS | If you plug a USB mouse in to the front of the DVR (0-776-81 and 0-776-84 only), you can choose where to see the mouse pointer. If this is set to VGA, you will only see the pointer on a monitor connected over the VGA port on the back of the DVR. If it is set to CVBS, you will only see the pointer on the normal connected monitor. |
Zoom in CH | OFF CH1 . . CH4/CH8 | This will make one channel fullscreen all the time, unless a trigger causes a channel to go fullscreen as set up by Linkage here. It also gets overwritten by CYCLE CH. |
DataImage46.jpeg
| Files | ||
|---|---|---|
|
|
DataImage46.jpeg
405 KB
|